BDEUS ERIE Series Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Arredamento per interni BDEUS ERIE Series. BDEUS ERIE Series 6.

Stampa la pagina

Battery Lock Wire Installation Guide

When disconnect the power supply,the battery lock wire and two batteries with 9V 2A can be used together to

flat the foundation.

How To Reset

STEP 1：Unplug foundations from the power source.

STEP 2：Plug foundations back into the power source after 60 seconds.

STEP 3：Automatic reset is completed

Dream Motion APP（Optional）

The Dream Motion APP is applied to control the foundation, available to both IOS and Android users.

IOS

Open the APP store, search the keyword "Dream Motion" to download the application.

Android

Open the Google Play to search the keyword "Dream Motion" and download the application.

Please follow the operation guidance in APP!

DC power cord

Head

Foot

APP

Sync

Motor

Dream Motion

Troubleshooting

In the event the adjustable

foundation

fails to operate, investigate the symptoms and possible solutions below.

• Make sure the remote control is paired with the foundation

The adjustable foundation does not

• Check that the power cord is plugged into a working and grounded

respond when the remote is used.

electrical outlet. Unplug the power cord from the outlet. After 30

Remote control led illuminates and

seconds, plug it back in. Press any button on the remote control

appears to be normal.

and hold until light on the wireless remote illuminates.

• Make sure the wireless remote is paired with the foundation.

• Check that the power cord is plugged into a working and grounded

electrical outlet. Unplug the power cord from the outlet. After 30

No features or function of the

seconds, plug it back in. Press any button on the wireless remote

foundation activates.

and hold until light on the wireless remote illuminates.

• Check that the surge protection device or electrical outlet is not

defective. Test the outlet by plugging in another working appliance.

• Your foundation may be obstructed preventing smooth operation.

Remove obstructions from around and under the bed.

Head or foot lifts elevate foundation

• Check that the head section is not too close to the wall.

but does not return to flat position.

• If a headboard is installed, check that it is not too close to the

edge of the mattress. Make sure there is enough distance between

the headboard bracket and the mattress.

• Check the batteries in the wireless remote. Replace with new

batteries, if necessary.

• Make sure that you are following the duty cycle of the motors.

Do not operate for more than two minutes over a 20-minute period

Head or foot lift function has minor

or approximately 10% duty cycle.

interference during operation.

• Press the lift buttons firmly and accurately.

• Wireless remote control may be experiencing common radio

frequency interference from other radio transmitting devices. Wait

several seconds and then try pressing the lift buttons again.

A clicking noise is heard under the

• This is normal. The lift motors click when they are engaged. No

foundation when raising or lowering

action is required.

the sections.

• Power off and wait 1 minute and then power on and pairing again.

• Open the battery box and toggle the switch to "A" or "B" position, then

Two foundations can't synchronoze.

press "Memory 1", next press and hold "Flat" until hearing a beep sound

of each buzzer on the control box.