Bosch HBG38U7 0 Series Manuale di istruzioni - Pagina 11
Sfoglia online o scarica il pdf Manuale di istruzioni per Forno Bosch HBG38U7 0 Series. Bosch HBG38U7 0 Series 40.
Stampa la paginaPress the
button to switch to the temperature.
X
2.
Turn the rotary selector to set the desired temperature.
3.
Press the
button.
n
4.
Operation starts.
Once the dish is ready, switch the oven off with the
or select and apply a new operating mode.
Opening the oven door during cooking
Operation is suspended. When the door is closed again,
operation resumes.
Pausing operation
Press the
button briefly. The oven is paused. The symbol
n
flashes. Press the
button again, operation continues.
n
Changing the temperature or grill setting
This can be done at any time. Turn the rotary selector to
change the temperature or grill setting.
Cancelling operation
Press and hold the
button until 3D hot air and 160 °C
n
appear. You can now change the settings.
Calling up information
Press the
button briefly. The first item of information appears.
°
Check each further item of information using the
selector. You will find information on the heating temperature,
types of heating, shelf position and accessories.
Setting the cooking time
See section Time-setting options, setting the cooking time.
Setting a later end time
See the section entitled Time-setting options, Setting a later end
time.
Recommended settings
If you choose a dish from the recommended settings, the ideal
setting values are already specified. You can choose from
many different categories. You will find recommended settings
for a large number of dishes – from cake, bread, poultry, fish,
meat and game through to bakes and pre-prepared products.
You can change the temperature and cooking time. The type of
heating is fixed.
You can access the various dishes by navigating through
several selection levels. Try it out and see the range of dishes
for yourself.
Selecting a dish
Press the
1.
3D hot air, 160 °C are suggested in the display.
Turn the rotary selector anticlockwise to Recommended
2.
settings.
The first food category appears.
Press the
3.
the required category by turning the rotary selector.
Use the
Turn the rotary selector to find the next selection.
The setting for the selected dish now appears. You can
change the temperature, but not the type of heating.
Press the
4.
Operation starts. The cooking time is shown counting down in
the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. The status bar shows
00:00:00. You can cancel the signal early by pressing the
button.
Changing the temperature or grill setting
Turn the rotary selector to change the temperature or grill
setting.
button
%
Changing the cooking time
Press the
cooking time. Press the
Calling up information
Press the
selector.
n
Setting a later end time
See the section entitled Time-setting options, Setting a later end
time.
Setting rapid heating
Rapid heating is not suitable for all types of heating.
Suitable types of heating
3D hot air
■
Top/bottom heating
■
HydroBaking
■
rotary
[
Pizza setting
■
Intensive heat
■
Suitable temperatures
Rapid heating will not work if the temperature is set to less than
100 °C. If the temperature in the cooking compartment is only
slightly less than the temperature you have set, rapid heating is
not necessary. It will not switch on.
Setting rapid heating
Press the
appears next to the temperature you have set. The temperature
indicator bars start filling in.
Once all the bars are filled, rapid heating is complete. You will
hear a short signal. The
in the cooking compartment.
!
button.
button to switch to the food category and select
X
button to switch successively to the next level.
X
button.
n
button and turn the rotary selector to change the
0
button.
0
button and check the information using the rotary
°
button to activate rapid heating. The
c
symbol goes out. Place your dish
c
0
symbol
c
11