Carlin 102CRD Manuale di istruzioni - Pagina 3
Sfoglia online o scarica il pdf Manuale di istruzioni per Bruciatore Carlin 102CRD. Carlin 102CRD 20. Advanced oil burners 0.5 to 4.5 gph
Stampa la pagina
- 1. Table of Contents
- 2. PLEASE Read this First
- 3. Codes and Standards
- 4. EZ-66 & 102 Oil Nozzle Selections
- 5. Prepare Site • Assemble Burner • Mount Burner
- 6. Prepare Burner
- 7. Adjustment and Verification
- 8. Annual Start-Up and Service
- 9. Repair Parts
- 10. Maintenance Procedures
- 11. User Care and Maintenance
Model 99FRD, 102CRD & EZ-66 Oil Burners — Instruction Manual
1. 99, EZ-66 & 102 Oil Nozzle Selections
Table 1
Apply the guidelines below to select a nozzle when appliance-specific nozzle data is not avialable from the
manufacturer. See notes at end of table for application tips. 99FRD wrapped-shield air tubes are intended
only for approved applications in wet-base combustion chambers.
99FRD/EZ-66 Nozzle speci cations — Standard air tubes
Angle &
Brand
Spray
pattern
Hollow
60°A
Delevan
Hollow
45°A
Solid
60°B
Hollow
60°H
Hollow
45°H
Semi-solid
45°SS
Hago
Semi-solid
60°SS
Solid
45°ES
Solid
60°ES
Hollow
60°NS
Seimi-solid
45°AR
Monarch
Semi-solid
60°AR
Solid
45°R
Solid
60°R
Hollow
45°H
Steinen
Hollow
60°H
1. In general, all the nozzles shown above will burn well. However, in short combustion chambers, solid nozzles are not recommended because the flame may impinge on the back wall.
2. If the nozzle selected for a retrofit application results in a smoky fire, you can sometimes determine the best nozzle to use by observing the flame. To do this, slowly cover the air band slots with your fingers while
the burner is firing. The flame will begin to smoke in the area where there is more fuel than air. If the smoke begins on the outer edges, try a narrower or more solid nozzle spray pattern. If the flame begins to smoke
at the tips, try a wider or more hollow nozzle spray pattern.
3. For a packaged appliance application on which the burner has been tested, use the nozzle given in the appliance manufacturer's instructions or supplement for the best results.
MN99102 042015
Nozzle rating, GPH
0.50 to 0.75
0.85 to 3.00
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
(when appliance data is not available)
99FRD/EZ-66 Nozzle speci cations — Wrapped-shield air tubes
Angle &
Brand
Spray
pattern
Hollow
60°A
Delavan
Hollow
70°A
Hollow
60°H
Hago
Hollow
70°H
Hollow
60°NS
Monarch
Hollow
70°NS
Hollow
60°H
Steinen
Hollow
70°H
Semi-solid
70°Q
102CRD Nozzle speci cations
Angle &
Brand
Spray
pattern
Solid
60°B
Delavan
Solid
70°B
Solid
80°B
Semi-solid
45°SS
Hago
Semi-solid
60°SS
Delevan
Solid
70°B
Holow
45°H
Hago
Semi-solid
45°SS
Nozzle rating, GPH
0.50 to 3.00
•
•
•
•
•
•
•
•
•
Nozzle rating, GPH
2.00 to 3.50
3.00 to 4.50
•
•
•
•
•
•
•
•
– 3 –