1RT DTK4400 Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per VIDEOREGISTRATORE 1RT DTK4400. 1RT DTK4400 8.

Stampa la pagina

If you have followed the instructions contained in this manual and have difficulty in operating your VCR, locate the

PROBLEM in the left column below. Check the corresponding CORRECTIVE ACTION column to remedy the problem.

PROBLEM

No power.

Timer recording is impossible.

Cannot go into Record mode.

Playback picture is partially noisy. • Adjust tracking control for a better picture by pressing [CHANNEL

Cannot view a tape but the

audio is OK .

No or poor playback picture.

TV programs cannot be seen

normally.

No VCR operation from the

infrared Remote Control.

Video or color fades in and out • You cannot copy a copyrighted video tape. You are experiencing copy guard protection.

when making a copy of a video tape.

Operating temperature :

Converter output :

• Designs and specifications are subject to change without notice.

• If there is a discrepancy between languages, the default language will be English.

SERVICING

Should your VCR become inoperative, do not try to correct the

problem by yourself. There are no user-serviceable parts

inside. Turn off, unplug the power plug, and take the unit to our

Authorized Service Center.

CABINET CLEANING

• Wipe the front panel and other exterior surfaces of the VCR

with a soft cloth immersed in lukewarm water and wrung dry.

• Never use a solvent or alcohol. Do not spray insecticide liquid

near the VCR. Such chemicals may cause damage and

discoloration to the exposed surfaces.

TROUBLESHOOTING GUIDE

• Make sure the power plug is connected to an AC outlet.

• Make sure the power is turned on.

• Make sure the timer recording is set correctly.

• Make sure the power is off.

• Make sure the VCR clock is set correctly.

• Make sure the tape has a safety tab. If needed, cover the hole with cellophane tape.

• Head cleaning may be necessary. Refer to "AUTO HEAD CLEANING" .

• Make sure the VCR is not in the Menu mode.

• Select channel 3 or 4 at your TV, then press [VCR/TV] so that the VCR indicator on the

VCR comes on.

• Fine tune your TV.

• Re-check the ANT. IN and ANT. OUT connections. See page 3.

• Press [VCR/TV] so that the VCR indicator on the VCR disappears.

• Make sure the power plug is connected to an AC outlet.

• Check batteries in remote control.

SPECIFICATIONS

5°C~40°C (41°F~104°F)

VHF Channel 3 or 4.

MAINTENANCE

CORRECTIVE ACTION

Power requirement :

Power consumption :

Dimensions :

Weight :

AUTO HEAD CLEANING

• Automatically cleans video heads as you insert or remove a

cassette, so you can see a clear picture.

• Playback picture may become blurred or interrupted while the

TV program reception is clear. Dirt accumulated on the video

heads after long periods of use, or the usage of rental or

worn tapes can cause this problem. If a streaky or snowy

picture appears during playback, the video heads in your

VCR may need to be cleaned.

1. Please visit your local Audio/Video store and purchase a

good quality VHS Video Head Cleaner.

2. If a Video Head Cleaner does not solve the problem, consult

our nearest Authorized Service Center.

NOTES:

• Remember to read the instructions included with the video

head cleaner before use.

• Clean video heads only when problems occur.

– 7 –

(

)

] on the VCR.

110-220V, 50/60Hz

14 Watts

W 14-1/4" (360mm)

H 3-5/8" (92mm)

D 8-1/2" (216mm)

4.4 lbs. (2.0 Kg.) (approx.)