BDS EKF 530 Istruzioni per l'uso originali - Pagina 11

Sfoglia online o scarica il pdf Istruzioni per l'uso originali per Utensile elettrico BDS EKF 530. BDS EKF 530 20. Ekf series 300; ekf series 500; ekf series 600

Stampa la pagina

Inserting the tool

WARNING

Risk of injury!

►

Do not use damaged, soiled or worn

tools.

►

Change tools only when the machine

is switched off and at a standstill. Pull

the plug out of the mains socket.

►

After inserting, check that the tool is

engaged securely.

►

Only use tools, adapter and accesso-

ries that match the machine.

Proceed as follows to use the milling cutter:

Loosen the side clamping screw (3,

fig. 4).

Unscrew the housing from the motor.

Screw in the desired milling cutter.

Screw on the housing again.

Tight the clamping screw.

EKF Series 300/500/600

Setting the speed

NOTE

►

This function is only available for ma-

chines of the EKF Series 500/600.

►

The speed can be reduced for

processing stainless steel as well as

hard and stiff materials.

Set the speed by turning the speed

regulator (12, fig. 3) to the required

value.

Preparing