Dražice OKC 200 NTR/BP Manuale di funzionamento e installazione - Pagina 8

Sfoglia online o scarica il pdf Manuale di funzionamento e installazione per Scaldabagno Dražice OKC 200 NTR/BP. Dražice OKC 200 NTR/BP 12. Tank-type water heaters
Anche per Dražice OKC 200 NTR/BP: Manuale operativo e di installazione (20 pagine)

Dražice OKC 200 NTR/BP Manuale di funzionamento e installazione
15.

MOST FREQUENT FUNCTION FAILURES AND THEIR CAUSES

Water is cold
Water is not warm enough
Temperature of water is not
corresponding
Water is constantly dripping of
the safety valve
Do not try to repair the failure yourselves. Seek either expert or service help. It does not take much for an expert to
When making a repair appointment, report the type and serial number you find on the
remove the defect.
performance plate of your water heater.
16.

PRODUCT ACCESSORIES

The product is supplied with a safety valve, 2 – 4 fastening screws M 12x30, 2-4 washers  13
(OKCE version has them mounted in the hinges on the heater) and a thermometer. The above parts are
packed and placed in the packaging in the top part of the heater.
It is in your own interest to check the completeness of the accessories.
LED is on
LED is not on
LED is on
LED is not on
8
The temperature set on the thermostat is too low
Heating element failure
No supply voltage; thermostat failure;
Safety thermostat shut off probably due to failed
operation thermostat
failure of one of the coils in the element
(contains 2)
Defective thermostat
Input pressure too high; faulty safety valve