Drazice NAD 250 v1 Manuale di funzionamento e installazione - Pagina 2

Sfoglia online o scarica il pdf Manuale di funzionamento e installazione per Scaldabagno Drazice NAD 250 v1. Drazice NAD 250 v1 3. Accumulation tank

1. Description

Accumulation tanks serve accumulation of excessive heat from its source. The source may be a

solid fuel boiler, heat pump, solar collectors, fireplace inserts, etc.

The NAD type tanks serve storage of heat in the heating system only. Incorporation of an

accumulation tank in the heating system with a solid fuel boiler allows an ideal run of a boiler at

favourable temperature during the boiler operation. The main benefit lies in the period of optimum

operation (i.e. with maximum efficiency) when the excessive unconsumed heat accumulates in the

tank.

The tanks are made of a steel plate and tested by 0.9 MPa overpressure, without any inner surface

treatment. The tank is insulated with polyurethane CFCs-free insulation of 42 mm thickness with

perfect thermally insulating properties. The outer shell is made of steel sheet provided with a powder

coating.

Installation principles

The NAD accumulation tank is designed as stationary for vertical fitting to a fixed floor.

The tanks are not designed for accumulation of HSW – hot service water.

2. Designing the size and connection of ACCU tank to the heating system

An ideal size of the accumulation tank is designed by a design engineer, or a person sufficiently

qualified to design heating systems.

Product assembly must be implemented by an authorised person (confirmed in the warranty

certificate).

3. General Technical Parameters

Tank capacity (l)

Outer tank diameter (mm)

Height of tank (mm)

Max tank pressure (MPa)

Max temperature of heating water in

the tank (°C)

NAD 250 v 1

250

584

1573

0.3