Alen BreatheSmart 40 Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Pulitore d'aria Alen BreatheSmart 40. Alen BreatheSmart 40 13. Hepa air purifier

USING YOUR AIR PURIFIER

PLEASE NOTE:

The BreatheSmart 40 and 45i have capacitive touch control panels. The buttons only

operate with a quick, light touch. Holding the buttons down will not activate the controls

properly. A chime will indicate that the control has registered your touch.

Plug your air purifier into a grounded outlet.

Touch

Power Button in the center to start the air purifier. When your unit is on, the

lights will light up. To turn off the lights on your unit, press the

the air purifier, touch the

The BreatheSmart 45i has a Color Ring around the

as measured by the particle sensor.

COLOR

Blue

Green

Orange

Red

BreatheSmart 45i only. Press IONIZER to activate the ozone-safe ionizer. Activation of the

ionizer enhances your unit's ability to remove airborne particles (similar to the way dust is

attracted to a TV screen). Press the ionizer button again to turn off.

FILTER life Indicator — There are three lights above the FILTER button: Green, Yellow

and Red. The Green light will be illuminated for most of the life of the filter. The Yellow

light will come on shortly before your filter should be replaced. This is the ideal time to

order a new filter. The Red light will be illuminated when it is time to replace the filter.

After changing the filter, hold the FILTER button down for five seconds. This will reset the

Red light to Green.

Touch TIMER to have the air purifier run for a set amount of hours (either two, four, or

twelve) before turning off.

Power Button again after the lights have turned off.

MEANING

Very low level of airborne particles detected

Low level of airborne particles detected

Medium level of airborne particles detected

Significant level of airborne particles detected

Power Button. To turn off

Power Button indicating air quality,