Bosch HVA541NS0 Manuale di istruzioni - Pagina 8
Sfoglia online o scarica il pdf Manuale di istruzioni per Forno Bosch HVA541NS0. Bosch HVA541NS0 16.
Anche per Bosch HVA541NS0: Manuale di istruzioni (32 pagine)
Stampa la pagina
Automatic switch-on and switch-off
Baking or roasting starts for the set duration at a later time
which you chose.
Press the
button until the
0
1.
and three zeros are displayed.
Press the
function button again until "dur" and "0.00" flash
0
2.
alternately on the display panel and the "A" symbol flashes.
The current time may be 17:30, for example.
Set the cooking time (e.g. 1 hour) with the "+" and "-" buttons.
3.
The cooking time can be set to between 1 minute and
10 hours.
Press the
function button again until "End" and the switch-
0
4.
off time "18:30" (i.e. the current time plus the set cooking
time) flash alternately on the display panel.
Set the switch-off time (e.g. 19:30) using the "+" and "-"
5.
buttons.
The switch-off time can be set to up to 23 hours and
59 minutes.
Set the required heating function and temperature.
6.
The
Û
symbol disappears from the display panel.
In this example, the oven starts at 18:30 and switches off
again at 19:30.
The cooking time has elapsed
An audible signal sounds, the
display panel and the A symbol flashes.
Switch off the temperature selector and function selector.
1.
Press the
button until the
0
2.
The oven switches back to manual mode.
Care and cleaning
With good care and cleaning, your oven will remain clean and
fully-functioning for a long time to come. Here we will explain
how to maintain and clean your oven correctly.
Notes
Slight differences in the colours on the front of the oven are
■
caused by the use of different materials, such as glass,
plastic and metal.
Shadows on the door panel which look like streaks, are
■
caused by reflections made by the oven light.
Enamel is baked on at very high temperatures. This can
■
cause some slight colour variations. This is normal and does
not affect their function. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
:
Risk of electric shock!
Do not use any high-pressure cleaners or steam cleaners,
which can result in an electric shock.
:
Risk of burns!
The appliance becomes very hot. Never touch the interior
surfaces of the cooking compartment or the heating elements.
Always allow the appliance to cool down. Keep children at a
safe distance.
8
symbol flashes on the display
V
symbol disappears from the
Û
symbol appears.
Û
Displaying and changing set values
The set values and the remaining time for the various operating
modes of the electronic clock can be viewed and changed on
the display panel at any time.
Displaying the remaining time for the timer
Press the
0
button until the
The remaining time appears on the display and can be
changed with the "+" and "-" buttons.
Displaying and changing the cooking time and switch-off
time.
Press the
0
button until the
1.
panel.
Press the
button again until "dur" and the remaining
0
2.
cooking time flash alternately on the display panel and the A
symbol flashes.
The cooking time can be changed with the "+" and "-"
buttons. Press the "+" and "-" buttons at the same time to
switch off the automatic timer.
Press the
0
button again until "End" and the set switch-off
3.
time flash alternately on the display panel.
The switch-off time can be changed with the "+" and "-"
buttons. Press the "+" and "-" buttons at the same time to
switch off the automatic timer.
Cleaning agents
Damage to the various different surfaces caused by using the
wrong cleaning agent can be avoided by observing the
following instructions.
Do not use
harsh or abrasive cleaning agents
■
cleaning agents with high concentrations of alcohol
■
hard scouring pads and sponges
■
high-pressure cleaners or steam cleaners.
■
Wash new sponge cloths thoroughly before use.
Area
Cleaning agents
Appliance exterior
Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth. Do not use glass cleaners or
glass scrapers.
Stainless steel
Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth. Remove flecks of limescale,
grease, starch and albumin (e.g. egg
white) immediately. Corrosion can form
under such residues.
Special stainless steel cleaning prod-
ucts suitable for hot surfaces are availa-
ble from our after-sales service or from
specialist retailers. Apply a very thin layer
of the cleaning product with a soft cloth.
Aluminium and
Glass cleaner:
plastic
Clean with a soft cloth.
V
symbol flashes on the display.
V
symbol flashes on the display