Alen MDF-50AE Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Deumidificatore Alen MDF-50AE. Alen MDF-50AE 12. Alen dehumidifier owner's manual

Stampa la pagina

Removing the collected water

There are two ways to remove collected water.

1. Use the bucket

When the bucket is full, the unit will automatically stop

running, and the Full indicator light will flash.

Slowly pull out the bucket. Grip the left and right handles

securely, and carefully pull out straight so water does

not spill. Do not put the tank on the floor because the

bottom of the bucket is uneven. Otherwise the bucket

will fall and cause the water to spill.

Throw away the water and replace the bucket. The

bucket must be in place and securely seated for the

dehumidifier to operate.

The machine will re-start when the bucket is restored

in its correct position.

NOTES:

When you remove the bucket, do not touch any parts

inside of the unit. Doing so may damage the product.

Be sure to push the bucket gently all the way into the

unit. Banging the bucket against anything or failing to

push it in securely may cause the unit not to operate.

2. Continuous draining

Water can be automatically emptied into a floor

drain by attaching the unit with a water hose

(not included).

Remove the water bucket from the front of the unit, you will

find a section of hose located above the bucket.

Remove the rubber plug from the back of the unit and store

it in a safe location(see Fig.8).

Insert the water hose through the hole in the back of the unit

and securely press it onto the connector on the front of the

unit(see Fig.9). Then lead the water hose to the floor drain or

a suitable drainage facility.

Replace the bucket in the unit. The bucket must be in place and

securely seated.

NOTE: When the continuous drain feature is not being

used, remove the drain hose from the connector and

attach the back drain hole with the rubber plug shown

in Fig.1.

CARE AND MAINTENANCE

1. Pull out the bucket a little.

2. Hold both sides of the bucket

with even strength, and pull it

out from the unit.

Connector

Fig.5

Fig.6

3. Pour the water out.

Fig.7

Remove the

rubber plug

Push the hose

into the drain

hole

Fig.8

Drain hose

Fig.9