Anchor AN-1000X+ Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Altoparlanti Anchor AN-1000X+. Anchor AN-1000X+ 6. Speaker monitor
Anche per Anchor AN-1000X+: Manuale d'uso (14 pagine), Manuale d'uso (4 pagine), Manuale di avvio rapido (2 pagine), Manuale d'uso (14 pagine), Manuale d'uso (12 pagine)

Anchor AN-1000X+ Manuale d'uso
AN-1000X+ Speaker Monitor Owners Manual
Anchor Audio UHF wireless is a 16 channel, diversity wireless system that receives signals with two independent antennae. With diversity
wireless the receiver processes the stronger signal, effectively minimizing dropouts and interference from other transmitting sources. The
antennae are mounted internally so there are no obstructions or risk of damage.
CHANNEL SELECTION - BUILT-IN RECEIVER
Select a channel, set the built-in receiver & microphone transmitter
to that channel before using your wireless system.
If you have two wireless receivers repeat above for the second receiver.
Remember, each receiver/transmitter pair must be set to different
channels to avoid interference.
1. Choose any available wireless channel from 1 thru 16
(see page 4 for transmitter instructions)
2. Set the Wireless Channel Selection Knob to the channel you
choose in step 1
NOTE: If you experience ongoing interference with your wireless system, the selected frequency may be incompatible with other systems in the area.
DIVERSITY WIRELESS BY ANCHOR AUDIO
UHF WIRELESS
CHANNEL SELECTION
NOTE: Ongoing wireless interference? The frequency you selected may be in use by other systems in the area.
Change channels until you find a clear frequency.
CONTROLLING FEEDBACK
Feedback, a howling noise or shrill sound, is
self-generated by the sound system. It's caused
by a microphone picking up the sound coming
from the speaker and then re-amplifying it. Once
a feedback loop starts, it continues until the
system is adjusted.
FEEDBACK CAUSES
• Microphone too close, pointing towards
or in front of speaker
• Volume setting is too loud for room
• Sound reflecting off hard surfaces
Try different channels to find a clear frequency.
MADE IN USA
SIX YEAR WARRANTY
UHF WIRELESS
VOLUME CONTROL
RX INDICATOR LIGHTS
AVOIDING & ELIMINATING FEEDBACK
• Point microphone in a different direction
• Keep microphone away from the speaker
• Place speaker in FRONT of the microphone
• Reduce the sound system volume levels
CAUTION: Feedback can damage your equipment & may
be hazardous to hearing.
3