Anchor Explorer Pro Manuale d'uso - Pagina 11
Sfoglia online o scarica il pdf Manuale d'uso per Altoparlanti Anchor Explorer Pro. Anchor Explorer Pro 13. Anchor audio portable sound system
Anche per Anchor Explorer Pro: Manuale d'uso (8 pagine), Manuale d'uso (4 pagine), Manuale d'uso (8 pagine)
Stampa la pagina
- 1. Troubleshooting Guide
- 2. Important Safeguards
- 3. Specifications
- 4. Getting Started
- 5. Wireless Microphone Operation
- 6. Wireless Operation
- 7. Battery Operation
- 8. Battery Level Indicator
- 9. Charging Batteries
- 10. Replacing Transmitter Battery
- 11. General Operation
- 12. Line Inputs
- 13. Line Outputs
- 14. Speaker Output
Explorer PRO Control Panel
Wireless 1 Channel Selector
Note:
Connections
Wireless Level
must be made
Controls (Pull)
with shielded
cable to avoid
hum, radio
interference
or buzzing.
Battery Level
Indicator Light
Note:
Power Switch
Use of
companion
speaker will
reduce
battery run
time.
4
1. Set all input level controls to minimum and tones controls to
flat or middle position before turning on the power.
2. Plug a microphone into Mic 1 or Mic 2, or plug an audio
source into the Line-in input jack.
3. Turn power ON (LED above switch will light). If the LED
turns red the battery requires charging (see page 6).
4. Adjust the level control adjacent to the input used to desired
volume level.
5. Adjust Bass and Treble controls for desired sound quality.
Input Level
Controls
Input Jacks
Speaker
Output
EXP-6000U2
Back Panel
GENERAL OPERATION
Voice Over/Level Control (Pull)
Wireless 2 Channel Selector
Tone Controls
Rec Out
Line In
Line Out
12V DC Input
Charge
Indicator Light
AC Inlet