Bosch 1614 Manuale di istruzioni - Pagina 9

Sfoglia online o scarica il pdf Manuale di istruzioni per Utensile elettrico Bosch 1614. Bosch 1614 28. Plunge router
Anche per Bosch 1614: Manuale di istruzioni (28 pagine)

Stampa la pagina

Insert the templet guide and release the lock

lever to grip the templet guide in place.

Templet guides are used with a number of

special accessories, such as hinge templets and

dovetail fixtures which are listed in your

BOSCH catalog. In addition, special templets

are easily prepared for cutting repeated pat-

terns, special designs, inlays, and other

applications. A templet pattern may be made of

plywood, hardboard, metal or even plastic, and

the design can be cut with a router, jigsaw, or

other suitable cutting tool. Remember that the

pattern will have to be made to compensate for

the distance between the router bit and the

templet guide 24, as the final workpiece will

differ in size from the templet pattern 27 by that

amount, due to the cutter position.

Deluxe Router Guide

For routing operations such as grooving or

dadoing, it is often necessary to guide the tool

in a line parallel to a straight edge. One method

of obtaining a straight cut is to securely clamp

a board or other straightedge to the work sur-

face, and guide the edge of the router sub-base

along this path. It is best to keep the router in one

position as it is moved along the guide, as this

will produce the straightest cut.

The Bosch deluxe router guide is an accessory

that will guide the router parallel to a straight

edge or around a curved surface. The deluxe

router guide is supplied with two rods and a

series of wing nuts and screws to fasten the

guide and adjust its position relative to the bit.

With the guide installed and adjusted, the router

should be fed normally, keeping the guide in

contact with the edge of the workpiece at all

times. The deluxe router guide may also be

positioned under the router base for operations

where a limited amount of bit exposure is de-

sired.

BM 2610967928 1/97

The Bosch deluxe router guide includes a

fine-adjustment mechanism for extra precision,

and removable face plates for guiding the router

along straight or curved surfaces. For proper

operation, please refer to the instructions which

are included with this accessory.

Your router may be fitted with optional chip

extraction accessories, which are available from

your Bosch dealer. Chip extraction is most

effective on grooving, dadoing, and other flat-

surface operations where flying chips can be

controlled. It is less effective on edge forming

or when template guides are used as the vacuum

efficiency is greatly diminished in such cir-

cumstances.

WARNING!

fied in this manual or the BOSCH catalog for

use with this tool may create a hazard.

Maintenance and Service

WARNING!

formed by unauthorized personnel may result

in misplacing of internal wires and components

which could cause serious hazard. We recom-

mend that all tool service be performed at a

Bosch Factory Service Center.

Your Bosch tool has been properly lubricated

and is ready for use. We recommend, that tools

with gears be regreased with a special gear

lubricant every time the brushes are changed.

The brushes and commutator in your Bosch

tool have been engineered for many hours of

dependable service. To maintain peak effi-

ciency of the motor, we recommend that every

two to six months the brushes be examined.

Only genuine Bosch replacement brushes spe-

cially designed for your tool should be used.

After about 300-400 hours of operation, or at

every second brush change, the bearings should

be replaced at a Bosch Factory Service Center.

Bearings which become noisy (due to heavy

load or very abrasive material cutting) should

be replaced at once to avoid overheating and

motor failure.

Chip Extraction

Use of any accessory not speci-

Preventive maintenance per-

Tool Lubrication

Carbon Brushes

Bearings

12/7/98, 10:29 AM