Bosch 2 Manuale d'uso e istruzioni per l'installazione - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso e istruzioni per l'installazione per Utensile elettrico Bosch 2. Bosch 2 16. Mini blender
Anche per Bosch 2: Manuale di installazione rapida (16 pagine), Manuale per l'installazione e l'uso (18 pagine), Manuale di istruzioni originale (13 pagine), Manuale di istruzioni originale (22 pagine), Manuale di istruzioni (32 pagine), Manuale d'uso (28 pagine), Manuale di istruzioni (42 pagine), Manuale di istruzioni per l'uso (8 pagine), Manuale di istruzioni (8 pagine), Manuale di istruzioni (12 pagine), Manuale di avvio rapido (2 pagine), Manuale di avvio rapido (9 pagine), Manuale di istruzioni e istruzioni per l'installazione (36 pagine), Manuale d'uso e istruzioni per l'installazione (48 pagine), Manuale di istruzioni per l'uso (26 pagine), Manuale di riferimento rapido (2 pagine), Manuale d'uso e istruzioni per l'installazione (24 pagine), Manuale di istruzioni (42 pagine), Informazioni per l'uso (28 pagine), Manuale d'uso (40 pagine), Manuale d'uso e istruzioni per l'installazione (35 pagine), Manuale d'uso (24 pagine)

Stampa la pagina
Bosch 2 Manuale d'uso e istruzioni per l'installazione
en Preventing material damage
▶ Take hold of the filter cover after opening
until it no longer swings out.
▶ Close the filter cover slowly.
Risk of injury when opening and closing the
hinges.
▶ Keep your hands away from the hinges.
The light emitted by LED lights is very
dazzling, and can damage the eyes (risk
group 1).
▶ Do not look directly into the switched-on
LED lights for longer than 100 seconds.
WARNING ‒ Risk of electric shock!
If the appliance or the power cord is dam-
aged, this is dangerous.
▶ Never operate a damaged appliance.
▶ Never pull on the power cord to unplug the
appliance. Always unplug the appliance at
the mains.
▶ If the appliance or the power cord is dam-
aged, immediately unplug the power cord
or switch off the fuse in the fuse box.
▶ Call Customer Service. → Page 8
▶ Repairs to the appliance should only be
carried out by trained specialist staff.
2  Preventing material damage
2.1 General
Follow these instructions when using the appliance.
ATTENTION!
Condensate may cause corrosion damage.
▶
To prevent condensation from building up, switch on
the appliance during cooking.
If moisture gets into the controls, this may result in
damage.
▶
Never clean controls with a wet cloth.
Incorrect cleaning damages the surfaces.
▶
Follow the cleaning instructions.
3  Environmental protection and saving energy
Help protect the environment by using your appliance
in a way that conserves resources and by disposing of
reusable materials properly.
3.1 Disposing of packaging
The packaging materials are environmentally compat-
ible and can be recycled.
▶
Sort the individual components by type and dispose
of them separately.
4
Improper repairs are dangerous.
▶ Repairs to the appliance should only be
carried out by trained specialist staff.
▶ Only use genuine spare parts when repair-
ing the appliance.
▶ If the power cord of this appliance is dam-
aged, it must be replaced by trained spe-
cialist staff.
An ingress of moisture can cause an electric
shock.
▶ Before cleaning, pull out the mains plug or
switch off the fuse in the fuse box.
▶ Do not use steam- or high-pressure clean-
ers to clean the appliance.
WARNING ‒ Risk of explosion!
Highly caustic alkaline or highly acidic clean-
ing agents in conjunction with aluminium parts
in the interior of the appliance may cause ex-
plosions.
▶ Never use highly caustic alkaline or highly
acidic cleaning agents. In particular, do not
use commercial or industrial cleaning
agents in conjunction with aluminium parts,
e.g. grease filter on extractor hoods.
▶
Do not use harsh or abrasive detergents.
▶
Clean stainless steel surfaces in the direction of the
finish only.
▶
Never clean controls with stainless steel cleaners.
Condensation that flows back in may damage the ap-
pliance.
▶
The air extraction duct must be installed with a
gradient of at least 1° from the appliance.
If you put incorrect stress on the design elements, they
may break off.
▶
Do not pull design elements.
▶
Do not place objects on the design elements or
hang objects from them.
Information about current disposal methods are
available from your specialist dealer or local author-
ity.