Anchor AnchorSpan Liner Istruzioni per l'installazione

Sfoglia online o scarica il pdf Istruzioni per l'installazione per Tenda Anchor AnchorSpan Liner. Anchor AnchorSpan Liner 2.

Installation Instructions

STEP 1

BE CERTAIN GABLE END VELCRO IS OPEN BEFORE BEGINNING INSTALLATION. CONNECT PULL ROPES TO

D-RINGS AT LOWER ENDS OF LINER MID.

STARTING AT CHANNEL OPENINGS IN BEAMS, SLIDE KEDAR INTO INSIDE CHANNELS OF BEAMS. START BOTH

SIDES OF MID AT THE SAME TIME.

MIDS WILL BE PULLED IN WITH PULL ROPES. PULLEY MAY BE ATTACHED AT TOP ARCH OF FRAME FOR THIS

PURPOSE, OR PUSH POLES CAN BE USED.

FIRST MID WITH GABLE

END ATTACHED.

GABLE END

ATTACH GABLE END TO

FRAME AT EAVE BAR.

Anchor Span Liner

ANCHORSPAN

BEAM (TYP.)

CROSS SECTION LOOKING

AT SIDE OF ANCHORSPAN

MID

KEDARS

GABLE END OF

LINER - ATTACHED

TO FIRST MID.

GABLE END VELCRO

MUST BE OPEN

BEFORE PULLING

LINER IN CHANNEL.

FIRST MID WITH GABLE

END ATTACHED.

SLIDE KEDAR INTO

BOTH CHANNELS

SIMULTANEOUSLY.

ASL