Anchor F3 Manuale di istruzioni per l'installazione - Pagina 9

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Tenda Anchor F3. Anchor F3 16. Frame tent

STEP 6

Installation of hip end fabric

STEP 7

Installation of mid fabric

Unroll hip fabric and lay loosely beside frame, right side up.

Connect snap of pull rope to ring at end of kedar. Feed kedar up

into channel a few inches, then pull fabric up and over through

channel in rafter extrusion using the pull rope. One installer

should watch as kedar is fed into channel, while another should

keep hands on fabric as it is pulled over frame to ensure that

fabric does not catch on frame.

When fabric is centered on hip, move on to install the mid or

other end.

Unroll mid fabric and lay loosely

beside frame, right side up.

Connect snap of pull ropes to

rings at ends of kedars. Feed

kedar up into channel, then pull

up and over through channels in

rafter extrusions using the pull

ropes. One installer should watch

as kedar is fed into each channel.

When fabric is centered on frame,

move on to install rest of fabric.

Figure 6

Figure 7