Anchor Cinemark Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Impianto stereo Anchor Cinemark. Anchor Cinemark 8.

Stampa la pagina

Cinemark Acclaim Lectern Sound System Owners Manual

OPERATING THE WIRELESS MICROPHONE/TRANSMITTER

CHANNEL SELECTION - HANDHELD TRANSMITTER

* Comes with your customer order

1. Unscrew battery cover on bottom of microphone

2. Set the CHANNEL SELECTOR dial to match the channel setting

of your receiver

3. Replace battery cover and tighten firmly

USING YOUR WIRELESS MICROPHONES

After you have set the transmitter channel (see above) you are ready to use your wireless microphone:

1. Body-pack transmitter users must insert

the mic plug into the transmitter jack

marked MIC

2. Push the transmitter power button for two sec-

onds until ON (The red LED will stay on when

the mic is turned on. If the red LED flashes, the

battery is low)

CAUTION: Harmful feedback may occur when walking in front of a sound system or speaker with a wireless microphone. Always point microphone away from speakers!

REPLACE BATTERY - HANDHELD TRANSMITTER

1. Unscrew battery cover on bottom of microphone

2. Replace old batteries with two fresh size 'AA'

alkaline batteries

3. Replace battery cover and tighten firmly

NOTE: When using dual wireless, each microphone must be set to a different channel!

3. Turn the Acclaim power switch to ON

4. The RX indicators will light (only one indicator

will light at a time) when the wireless signal is

being transmitted and received

NOTE: Transmitter power must be OFF when changing batteries!

For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com/cinemark/

CHANNEL SELECTION - BODY-PACK TRANSMITTER

1. The channel selection dial is located on the side of the transmitter

2. Set the CHANNEL selection dial to match the channel setting of the receiver

REPLACE BATTERY - BODY-PACK TRANSMITTER

1. Slide open battery cover on front of transmitter

2. Replace old batteries with two fresh size 'AA'

alkaline batteries

3. Replace battery cover by sliding firmly into place

MADE IN USA

SIX YEAR WARRANTY