Anchor Beacon Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Sistema di altoparlanti Anchor Beacon. Anchor Beacon 4. Anchor beacon line array battery-powered, portable line array sound system
Anche per Anchor Beacon: Manuale d'uso (4 pagine), Manuale d'uso (10 pagine), Manuale d'uso (7 pagine), Manuale di avvio rapido (2 pagine), Manuale di avvio rapido (2 pagine), Manuale di avvio rapido (2 pagine)

Stampa la pagina

usinG the BuiLt-in mP3 PLAYer

Your MP3 player supports WMA and WAV files as well as MP3. Input

slots for play are USB, SD card slot and AUX port for other music player

devices.

Insert your memory card or USB stick and turn on the MP3 POWER.

Push MODE button until your device is displayed. The auxilliary port

becomes active when 3.5mm cable is inserted.

The LCD displays functions as used:

PoWer: press once for ON or OFF

mode: displays mode of operation

mute: press once for mute ON and again to mute OFF

rPt: press and release to repeat song

track+: press and release to next track

track-: press and release for previous track

Album+: press and release for next album or hold and

release until correct album is found

Album-: press and release for previous album or hold and

release until correct album is found

diversitY WireLess BY Anchor Audio

Anchor Audio UHF wireless is a 16 channel, diversity wireless system that receives signals with two independent antennae.

With diversity wireless the receiver processes the stronger signal, effectively minimizing dropouts and interference from

other transmitting sources. The antennae are mounted internally so there are no obstructions or risk of damage.

CHANNEL SELECTION - BUILT-IN RECEIVER

Select a channel, set the built-in receiver & mi-

crophone transmitter to that channel before using

your wireless system.

1. Choose any available wireless channel/

frequency from 1 thru 16

(see page 7 for transmitter instructions)

2. Set the Wireless Channel Selector Knob to

the channel/frequency you choose in step

If you have two wireless receivers repeat above

for the second receiver. Remember each receiver/

transmitter pair must be set to different channels

to avoid interference.

NOTE: Ongoing wireless interference? The frequency you selected may be in use by other systems in the

area! Change channels until you find a clear frequency!

ExTERNAL ACCESSORY

VOLUME CONTROL

WIRELESS 1 CHANNEL

WIRELESS 2 CHANNEL

SELECTION

WIRELESS 2

WIRELESS 1

Rx INDICATOR

LIGHTS

WIRELESS 1

WIRELESS 2

VOLUME CONTROL

controLLinG FeedBAcK

Feedback, a howling noise or shrill sound, is self-generated by the sound system. It's caused by a microphone picking up the

sound coming from the speaker and then re-amplifying it. Once a feedback loop starts it continues until the system is adjusted.

FeedBAcK cAuses

• Microphone too close, pointing towards

or in front of speaker

• Volume setting is too loud for room

• Sound reflecting off hard surfaces

AvoidinG & eLiminAtinG FeedBAcK

• Point microphone in a different direction

• Keep microphone away from the speaker

• Place speaker in FRONT of the microphone

• Reduce the sound system volume levels

cAution: Feedback can damage your equipment & may be hazardous to hearing.

need more heLP? Beacon sound system setup & operation videos!

Beacon Portable sound systems are equipped with a removable Travel Dolly that features wheels and a retractable handle.

SELECTION

To eliminate possible vibration from effecting the performance of your unit we recommended that you remove the Travel

Dolly before operating the system.

RETRACTABLE

HANDLE

(CLOSED)

RELEASE PEDAL

CORRECT SYSTEM PLACEMENT

visit our Website: www.anchoraudio.com

BeAcon trAveL doLLY

TOP BRACKET

BOTTOM BRACKET

WRONG SYSTEM PLACEMENT

removinG trAveL doLLY

1. Press & hold the spring-loaded

Release Pedal located on the

Bottom Bracket

2. Swing the dolly bottom away

from the system

3. Lift Handle up to remove dolly

from the Top Bracket

Reverse steps to reattach the dolly.