Anchor Admiral Manuale di avvio rapido

Sfoglia online o scarica il pdf Manuale di avvio rapido per Sistema di leggio Anchor Admiral. Anchor Admiral 2.

ADMIRAL ASSEMBLY

ADMIRAL LECTERN PARTS LIST

(A) Lectern Base . . . . . . . . . . . . . . 1 ea.

(B) Left Side Panel . . . . . . . . . . . . . 1 ea.

(D) Front Panel . . . . . . . . . . . . . . . . 1 ea.

(E) Lectern Shelf . . . . . . . . . . . . . . 1 ea.

(F) Lectern Top . . . . . . . . . . . . . . . . 1 ea.

(G) Screws . . . . . . . . . . . . . . . . . . . 13 ea.

Required Tools:

Phillips-Head Screwdriver

ASSEMBLY INSTRUCTIONS

1. Place LECTERN BASE (A) on level ground with wheel side down.

2. Attach LEFT (B) and RIGHT (C) SIDE PANELS to BASE using two (2) screws per panel

3. Fit FRONT PANEL (D) into place and screw in LECTERN BASE

4. Insert SHELF (E) as shown and secure with three (3) screws

5. Position LECTERN TOP (F) and attach from below with six (6) screws

6. Connect gooseneck microphone firmly in the XLR shock mount input on LECTERN TOP (F)

Note: Do not use a power tool to assemble. Over-tightening the screws may cause wood to fracture.

If installing a sound system, be sure to measure it and place shelf accordingly.

CONNECTING A PORTABLE SOUND SYSTEM

After the Admiral is fully assembled:

1. Position ADMIRAL lectern upright on a flat surface

2. Place portable sound system inside the cabinet on shelf as shown

3. Connect lectern XLR cable to sound system

Note: See your sound system manual for operational instructions.

CONNECTING AN IN-HOUSE SOUND SYSTEM

1. Connect an XLR cable to the ADMIRAL's XLR cable (male to female)

2. Connect the other end of the XLR cable to your main audio mixer

GOOSENECK SHOCK MOUNT JACK

ADMIRAL

PORTABLE LECTERN

(F) LECTERN TOP

(B) LEFT SIDE PANEL

(A) LECTERN BASE

NOTE: Elevate lectern when possible to project sound over listeners in front.

GOOSENECK SHOCK MOUNT JACK

(D) FRONT PANEL

(E) LECTERN SHELF

TILT-N-ROLL CASTERS