Operating Instructions
Getting Started
1. Load dishwasher
(See Preparing
and Loading
Dishes).
2. Add detergent
(See Dishwasher
Dispenser
&
Detergents).
3. Add rinse aid, if needed
(See Rinse Aid).
4. Turn dial clockwise
to select cycle (See Wash
Cycle Selections).
5. Select desired
energy
OPTIONS
(See Energy
Options).
6. Run hot water faucet nearest
dishwasher
until
water is hot. Turn water off.
7. To start, close door to latch.
Wash Cycle Selections
Note: Not all cycles
available
on all models.
Normal Wash
For regularly
soiled dishes and silverware:
• Turn dial to NORMAL
WASH.
• Select desired
OPTIONS.
Light Wash
For lightly soiled or pre-rinsed
dishes and
silverware:
• Turn dial to LIGHT WASH.
• Select desired
OPTIONS.
Energy Options
Hot or Heat Dry Option
HOT or HEAT DRY option provides
faster drying
since the heating element
is on during the drying
portion of the cycle.
The HOT or HEAT
DRY option in combination
with
rinse aid will give you excellent
drying results.
The
energy to use HOT or HEAT DRY costs pennies
per cycle.
You may turn off the HOT or HEAT
DRY option, however
you will have items in your
dish load that will not be dry at the end of the cycle.
Cool or Air Dry Option
COOL or AIR DRY option saves electricity
since
the heating element
is off during the drying portion
of the cycle. To speed drying
process,
open the
door slightly
after the cycle is complete.
Some water droplets
may remain on door and tub
and in areas where
dishes touch silverware
basket
and rack.
With either option, you may see water vapor
coming from vent during drying portion
of cycle.
The drying option may be changed
at any time
during the cycle and affects
only the drying period.
Water Heating Delay
This dishwasher
is equipped
with a thermostat
to
ensure that the water is heated to the proper
temperature
to deliver optional
cleaning
and drying
results.
The knob/timer
on the dishwasher
may
pause at approximately
the 7pm position.
The
dishwasher
is not "stuck" here, but is simply
heating
the water to the proper temperature
before
advancing.
If the dishwasher
holds this position on
every cycle, then the incoming
(house)
water
temperature
may be low. A minimum
water
temperature
of 120F is recommended
to avoid this
water heating delay.
Stampa la pagina