Electrolux EDW 2200 Manuale di servizio - Pagina 13

Sfoglia online o scarica il pdf Manuale di servizio per Lavastoviglie Electrolux EDW 2200. Electrolux EDW 2200 18.

Functional Test Cycle

After accessed Service mode (L1, L2 and L3 blinking):

1. Press button S3 to start the test cycle. The cycle will not start if

door is opened.

L3 blinks for the duration of the test cycle.

Display shows the remaining time of test cycle.

The test cycle runs as a normal wash cycle. It can be

cancelled or run to its end.

Enable/disable Extra Rinse

After accessed Service mode (L1, L2 and L3 blinking):

1. Press button S1+S2 to enter this function.

L1 blinks indicating it is in Extra Rinse setting mode.

Display show the current setting of Extra Rinse. "0E" for

disabled, "1E" for enabled.

2. Press button S1 to change the setting.

3. Switching off the appliance will exit Service mode.

Technical Support – RA

EDW1950

Enable/disable Pulse Wash

After accessed Service mode (L1, L2 and L3 blinking):

1. Press button S2+S3 to enter this function.

L2 blinks indicating it is in Pulse Wash setting mode.

Display show the current setting of Pulse Wash. "0P" for

disabled, "1P" for enabled

2. Press button S2 to change the setting

3. Switching off the appliance will exit Service mode.

Chapter