Carlson SS900 Istruzioni per la ricarica

Sfoglia online o scarica il pdf Istruzioni per la ricarica per Ricevitore Carlson SS900. Carlson SS900 2.

Carlson SS900 Charging Instructions

Power

The SS900 has two built-in Rechargeable Nickel Metal Hydride (NiMH) battery packs that can

provide up to 12 hours of operating time on a Full Charge.

NOTE: Because the internal battery charger senses several conditions, including temperature,

you should charge the unit away from any known or potential heat sources. Units exposed to

temperatures in excess of 110 degrees Fahrenheit during the charging cycle may experience

incomplete charging and reduced operating time per charge.

Charging the Batteries

To maximize battery power you should charge the batteries for eight hours prior to use.

To charge the batteries in the SS900 Base Radio:

1. Connect the power cord to the power supply. Plug the two-pin power supply

connector into the two-pin receptacle on the front of the base. Plug the power supply

into a power outlet.

2. Press the red power button. The Power, Charging and Battery LED should light

indicating that the base has power, batteries installed and that the batteries are

charging.

This document contains confidential and proprietary information that remains the property of Carlson Software Inc.

Page 1 of 2

Carlson Software Inc.

102 West 2

Street

Maysville, KY 41056

www.carlsonsw.com

Phone: (606) 564-5028

Fax: (606) 564-6422

Updated 8/22/2008