Formax FD 280-10 Manuale dell'operatore - Pagina 8

Sfoglia online o scarica il pdf Manuale dell'operatore per Macchine piegatrici Formax FD 280-10. Formax FD 280-10 16.

3. POWER CONNECTION

BEFORE PLUGGING THE FEEDER INTO AN

OUTLET, CAREFULLY READ THE FOLLOWING

INFORMATION ABOUT VOLTAGES AND THE

POWER CORD.

The FD 280-10 can connect to any power distribution

system, including the European IT Power System.

Because the European IT Power System does not have a

grounded neutral leg, the FD 280-10 uses protective

fusing in both the neutral and hot supply lines of power.

A BLOWN FUSE IN THE NEUTRAL LEG COULD

MEAN INTERIOR PARTS OF THE FEEDER

REMAIN AT A HAZARDOUS VOLTAGE. ALWAYS

UNPLUG THE POWER CORD BEFORE REMOVING

COVERS FROM THE FEEDER.

The FD 280-10 is rated for continuous operation using a

variety of supply voltages. The manufacturer configures

the FD 280-10 to operate with the voltage requested by

the customer. Power connects to the entry end of the

FD 280-10.

1. Plug the POWER CORD into the APPLIANCE INLET

on the entry end of the FD 280-10.

TO PREVENT ELECTRICAL SHOCK, ONLY PLUG

THE POWER CORD INTO A GROUNDED OUTLET.

WARNING