Formax FD 87HD Manuale di manutenzione - Pagina 3
Sfoglia online o scarica il pdf Manuale di manutenzione per Apparecchiature industriali Formax FD 87HD. Formax FD 87HD 14. Hard drive punch
Anche per Formax FD 87HD: Manuale dell'operatore (2 pagine)
Stampa la pagina
Specifications
Punch Hole Size:
Hard Drive Size:
Feed Opening:
Punching Cycle:
Dimensions:
Weight:
Security Level:
Power Supply:
Set-up Guidelines
1. Install the FD 87HD on a level surface, away from heat sources and direct sunlight.
2. Insert plug into wall outlet with the appropriate voltage, 110V. If the outlet is shared with another electronic
device, the total current should not exceed 30A (at 110V).
Punching Chamber
Waste Bin Full: If the waste bin is full, LED will light and operation will stop
Door Open Sensor: If the waste bin door or safety shield are open, LED will light and operation will stop
AutoStop: Automatically stops after each punching cycle
AutoReverse: In case of jam, motor automatically switches to reverse to protect the punching die
Start: Punch is operating
.39" (10mm)
2 1/2" or 3 1/2"
4.65" (118mm)
14 seconds
19.68" W x 18.5" D x 35" H (500 x 470 x 890mm)
154 lbs. (70kg)
H-3 (DIN 66399 standard)
110V, 50-60Hz
Safety Shield
Fault Indicator: If there is a jam or other fault, LED will light and operation will stop
Release Knob
Safety Shield Handle
1
LED Control Panel
Power Switch
Door (waste bin inside)