Ancona Capri Series Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Prodotto idraulico Ancona Capri Series. Ancona Capri Series 9.

UNDERMOUNT INSTALLATION

Please carefully read complete instructions before beginning installation.

Note: These instructions are for installation with solid surface, composite material countertops.

Ancona recommends professional countertop installers, customer is responsible for damage to

the countertop or sink during installation.

1 .Unpack the new sink and check the contents of the materials supplied: Sink, Mounting brackets, and

cut-out template (depending on model).

2. Supplied cut-out template provides three options of installation:

A. Flush mount: Sink edge is flush with countertop opening. (FIGURE 1)

B. Reveal mount: Sink rim is exposed approximately 114" from the edge of countertop opening. (FIGURE 2)

3. Cut out the appropriate template for your sink model and desired installation option. Place template in

desired position on countertop, locating center of the bowl over cabinet and faucet holes.

4. Trace the outline of the template and not countertop along the inside of the line using appropriate

cutting tools. Template is for guide only. Use physical sink to ensure accurate cut-out opening.

5. Locate the drill holes on the underside of the countertop, approximately 1" from edge of the sink to be

installed. Holes should be evenly spaced approximately 6" to 8" apart starting from every corner as shown

in Figure 3. It is recommended to install a faucet at this point before installing the sink.