Common Sense RC SNAP&FLY Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Giocattolo Common Sense RC SNAP&FLY. Common Sense RC SNAP&FLY 17. 3-in-1 rtf modular airplane system

Stampa la pagina

SNAP&FLY -- Modularized RC Airplanes

The Base Module has a fuselage portion that houses the flight components: propeller,

motor, receiver, actuators and push/pull rods. The magnetic connectors will connect the

Base Module to an airplane module, and the magnetic connectors will ensure the control

linkage connection between the Base Module and the airplane module.

The receiver and the supplied LiPo batteries have magnetic electrical-connectors. To

power up the receiver connect a supplied LiPo battery to the receiver as indicated in

Photo 2A2 (do not attempt to reverse the connection polarity). Energize the receiver

before a flight. Disconnect the LiPo battery from the receiver immediately after the flight.

When not used the LiPo batteries should be kept apart in separate storage. Do not mix

bare batteries together. Care should be taken to avoid short circuiting the LiPo batteries.

Photo 2A2. – Power up the receiver

B. The Airplane Modules

There are 3 different airplane modules in the package: the Biplane Module, the Canard

Module and the V-tail Module.

Photo 2B1. – The airplane modules

Each of the 3 airplane modules can be connected to the Base Module to form a

functional airplane. The fuselage structure is held together by connecting the magnetic

connectors (a) and (b) (Photo 2-B2) of the airplane module to the matching magnetic