AND OMNIACE RA3100 Manuale di istruzioni - Pagina 10

Sfoglia online o scarica il pdf Manuale di istruzioni per Strumenti di misura AND OMNIACE RA3100. AND OMNIACE RA3100 20. Viewer

2.Functions － 2.2.Mouse Operations (Used as Substitute for the Touch Panel and Jog Dial)

2.2. Mouse Operations (Used as Substitute for the Touch Panel and Jog Dial)

The Ctrl, Shift, and Alt keys on the keyboard can be combined with mouse wheel operations to

configure settings and move or enlarge/reduce the waveform.

Press the Z key at the same time to reduce the step for updating. (This enables fine adjustment.)

Example 1)

Enlarging the waveform X axis with fine adjustment

Press the Ctrl + Z keys and rotate the mouse wheel up

Example 2)

Moving the waveform Y axis with coarse adjustment

Press the Alt key and rotate the mouse wheel down

Note

When the waveform cannot be moved, it means that there is no data that can be displayed.

Action

Changing a setting

(mouse wheel)

Changing a setting

(dialog)

Click the

button on the right side of the [RA3100 Viewer] screen to

display the channel settings. Click a setting to change the frame to orange

and enable the setting value to be changed using mouse wheel operations.

For example, selecting [Color] enables the color to be changed and selecting

[Disp. pos.] enables the ratio number of the display width to be changed.

Right-click a setting to display the dialog corresponding to that setting.

- Selection palette dialog

Select a setting value to reflect the setting and close the dialog. Click

outside the dialog to return without changing the setting.

- Number entry dialog

Operate the buttons on the screen or perform keyboard entry to enter a

number. When performing keyboard entry, press the [Enter] key to reflect

the setting value and close the dialog.

Mouse operation and behavior