Dreame V10 Faq - Pagina 3

Sfoglia online o scarica il pdf Faq per Aspirapolvere Dreame V10. Dreame V10 4. Cordless vacuum cleaner

1 Why is my cleaner not working after I press the power button?

1 The cleaner cannot power on at low battery. Please charge and restart again.

2 Please check if the air duct or suction inlet is clogged. If it is, remove the debris.

2 How many suction modes does the V10 have?

Dreame V10 has 3 suction levels: Turbo mode, Standard Mode and Eco mode,

operate speed adjustment button to switch among the 3 modes.

3 What is the suction power of V10?

Vacuum degree and suction power in different working modes.

Turbo mode: 140AW, 22kPa

Standard mode: 36AW, 12kPa

Eco mode: 13AW, 7kPa

4 How long can V10 operate after fully charged?

Turbo mode: 10min

Standard mode: 28min

Eco mode: 60min

5 Why is the suction power fading?

1 Check if the Hepa filter is clogged with debris. If yes, clean the Hepa filter or

change a new one;

2 Check if the brush or air duct is clogged. If yes, remove the debris.

6 Why did V10 fail to charge?

If charging failure occur, follow the steps for troubleshooting.

1 Check if the adapter and the main body is connected properly, if not, please

reconnect.

2 Check the contact metal balls of 2-in-1 Charging & Storage Mount and contact

chips of battery pack to see if they are smudged, which may result in poor contact.

If they are, please clean them with dry cloth and recharge.

7 There is abnormal noise when motor operates?

Either the suction inlet or brush is clogged, need to clean them in time.

8 Why there's a red led flashing when charging?

The charging adapter doesn't match the vacuum, please use the original adapter.