Carmanah SpeedCheck-15 Manuale di installazione - Pagina 11

Sfoglia online o scarica il pdf Manuale di installazione per Radar Carmanah SpeedCheck-15. Carmanah SpeedCheck-15 18. External radar kit
Anche per Carmanah SpeedCheck-15: Manuale di sostituzione (14 pagine), Manuale di sostituzione (11 pagine), Manuale di sostituzione dell'anta del mobile (10 pagine), Manuale (16 pagine), Manuale di installazione (12 pagine)

4.0 Converter Configuration

There are two options for configuring the serial to Ethernet converter:

•

Static IP address

Dynamic IP address

•

The following steps are common to both options and need to be completed first. The steps below assume

a Windows-based laptop:

1. Ensure your laptop is connected to the serial to Ethernet converter via the Ethernet cable connected in

Section

2. Press the Windows key, type View Network Connections and press Enter. Right click on the Ethernet

device and select Properties.

3. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.

4. Select Use the following IP address and enter the following:

a. IP Address: 192.168.0.5

b. Subnet mask: 255.255.255.0

5. Open a web browser and type 192.168.0.7 in the address bar. In the window that opens, enter admin for

both username and password and click OK. You should now be connected to the USConverters web

interface.

Additional information can be found here:

converter-us2000a

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

SERIAL TO ETHERNET INSTALL GUIDE

4.0 CONVERTER CONFIGURATION

http://www.usconverters.com/serial-etherent-

carmanah.com