Forms+Surfaces 3RIVERS PEDESTRIAN Istruzioni per l'installazione e il cablaggio - Pagina 3

Sfoglia online o scarica il pdf Istruzioni per l'installazione e il cablaggio per Luce per esterni Forms+Surfaces 3RIVERS PEDESTRIAN. Forms+Surfaces 3RIVERS PEDESTRIAN 4.

Stampa la pagina

3RIVERS

STEP BY STEP

FOR ALL 3RIVERS PEDESTRIAN LIGHTING

11-13mm

(.47")

Prepare Wires

• Prepare wiring from site junction box

and bollard by stripping and removing

11-13mm (.47") of insulation.

Note: Wire used should be 22-14 AWG

copper conductors.

T 800.451.0410 | www.forms-surfaces.com

© 2020 Forms+Surfaces® | All dimensions are nominal. Specifications and pricing subject to change without notice. For the most current version of this document, please refer to our website at www.forms-surfaces.com.

PEDESTRIAN

Connect Wires

• Insert ground (green), neutral (white), and

positive (black) wires into provided wire

nuts, being sure to match wire color codes

from junction box to bollard.

• Tighten wire nuts until exposed wire ends

are below bottom of wire nut.

• Inspect all wiring and connections before

turning power supply on.

Caution: Light fixture rated for 120-277

VAC power

SURFACE MOUNT INSTALLATION & WIRING INSTRUCTIONS

Position & attach pedestrian

• Slide pedestrian base plate over J-bolt

anchors and lower pedestrian to concrete

level. Keep supported until attached and

tightened.

page 3 of 4 | 10-07-20