Carmanah R247-E Manuale di installazione - Pagina 7

Sfoglia online o scarica il pdf Manuale di installazione per Apparecchiature di illuminazione Carmanah R247-E. Carmanah R247-E 20. 24 hour flashing beacon
Anche per Carmanah R247-E: Manuale di avvio rapido (20 pagine), Manuale d'uso (20 pagine), Manuale di sostituzione del sistema di gestione dell'energia (12 pagine)

Stampa la pagina
Carmanah R247-E Manuale di installazione
3"
Discard
leftover
wire
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [email protected] | carmanah.com
Prepare AI Harness
If the AI Integration Kit was ordered with a
Carmanah E/F system, skip to step 15.
• Obtain AI harness.
• Cut and remove terminals of the five wires shown
1
(violet, blue, black, red and yellow).
• Leave green wire ring terminal intact (not shown).
• Cut yellow wire to same length as black wire.
• Cut a three-inch section of yellow wire and strip each
end 0.35", for use later.
2
• Install provided heat-shrink tubing around the five wires
4.25" from end of black wire (other wires will end up
3
being longer).
• Use heat gun to affix the heat shrink tubing.
• Strip insulation of the five wires 0.35".
4
APPLIED INFORMATION (AI) INTEGRATION KIT INSTALL GUIDE
E/F Series
4.25"
Page 7