Anda Telecom FE1/V.35 Manuale d'uso - Pagina 15

Sfoglia online o scarica il pdf Manuale d'uso per Convertitore multimediale Anda Telecom FE1/V.35. Anda Telecom FE1/V.35 20. Interface converter

Chapter 3 Installation

After you received the devices, firstly you should check whether the

packing is well, otherwise, please contact with our company or the

local agent in time so as to solve the problem.

After opening the box, you should check whether the device and the

fittings are correct and well according to the incasement list,

otherwise please contact with our company or the local agent.

Firstly place the device at a steady position, the working environment

should be dry, tidy, ventilative, and the temperature should be

reasonable.

Check whether the clock and time slots control switch are right

before connecting the power supply. The device is set internal

oscillator when leave factory, if it is point-to-point application, please

adjust one side internal oscillator, the other side line clock, which

will follow the time slots setting automatically.

Check the power collocation of FE1/V.35 interface converter, if it is

DC model, please pay attention to the voltage value and polarity,

then connect the power supply referring to this manual.

Please test the device before using: open the power switch, indicator

(PWR) is bright, which show the power supply is normal; when you

don't connect anything, PWR(Green)、E1LOS(Red) are all bright, the

others are off.

Shut down the power, connect the E1 cables and V.35 cables, set the

clock and time slots control switch correctly referring to this manual,

then open the power switch, the device will turn into normal working

state.

During the process of transportation and installation, the device

should be protected against vibration and mechanical damages.

Please examine the voltage value and whether the polarity is in

accord with the mark on the rear panel before electrifying, or else the

User Manual

15-20