CommScope AEKT Foglio di istruzioni - Pagina 2
Sfoglia online o scarica il pdf Foglio di istruzioni per Involucro CommScope AEKT. CommScope AEKT 4. For commscope s4-90m-r1-v2 antennas
Stampa la pagina
MAXIMUM TORQUE
M6
8.0N.m (6ft.lbs)
M12
58N.m (43ft.lbs)
Pre-Assembly of pipe bracket
Snap the hook
of maintenance
17
wire here
Step1 Assemble the EMPTY BOX
Do not hit the endcap of the passive antenna
during installation. Leave 5 mm gap between
two endcaps.
www.commscope.com
© 2019 CommScope, Inc. All rights reserved.
Visit our website at www.commscope.com or contact your local CommScope representative or BusinessPartner for more information.
All trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope, Inc. 639853 B (09/19)
10
13
M6 bolt
12
EMPTY BOX
AEKT EMPTY BOX installation
M12 bolt
13
14
15
11
M12 bolt
If the brackets lost, purchase AEKTBKT
16
14
7
13
GAP
Step2 Mount the EMPTY BOX
M10 bolt
8
16
18
19
Store extra brackets for future use
Passive Antenna
assembly to the pole
639853
20
Page 2 of 4