Andea Electronics RL865 Manuale d'uso - Pagina 15

Sfoglia online o scarica il pdf Manuale d'uso per Lettore di schede Andea Electronics RL865. Andea Electronics RL865 18. Micro-power multi-protocol reader

Stampa la pagina

Note:

Step 1: In the software main interface, select the menu "Single Tag Test";

Step 2: In the "Single Tag Test" interface, select the type of tag to be operated;

Step 3: mode: none address, address.

1) For a single tag, select the "none address" mode.

2) For multiple tags, select the "address" mode.

Step 4: Click the "Inventory" button to display the UID list in UID drop-down box.

Step 5: 1) For a single tag: click the "Connect" button;

2) For multiple tags: in UID drop-down box, select the tags required to be

operated, and then click the "Connect" button;

Steps:

1) Set the data block of the tag to be operated in the Addr drop-down box and the

Num drop-down box. After setting, the operable data block is displayed in green

indicating that it can be operated;

2) Click [Read Block] to read the data value of the data block selected in step 1;

3) Write the value in the line (green area) of the data block whose value should be

written, and then click [Write Block];

4) After the operation is completed, click the [Disconnect] button to disconnect the

tag connection.

Guangzhou Andea Electronics Technology Co., Ltd.

http://www.gzandea.com

Figure 15 Single tag reading and writing steps

The green area represents

the set operating area

User manual

①

②

③

12/15