Formula Sound PM-100 Manuale d'uso - Pagina 12

Sfoglia online o scarica il pdf Manuale d'uso per Miscelatore Formula Sound PM-100. Formula Sound PM-100 12. Modular production

Removing and Re- fitting Modules.

A removable cover on the rear of the mixer provides access to the ribbon cable which connects to all

the modules. This cover is secured by 2 screws. Although modules can be removed and replaced

from the mixer front when necessary removing the rear connector cover makes disconnecting

modules easier particularly if more than one module is being removed.

To remove an input module from the chassis first disconnect all connections from the module and

ensure that the power supply is turned off. Input modules are secured by 2 screws, removing the

screws will release the module. Carefully ease the module out of the chassis and disconnect the

ribbon cable connector.

The output module is secured by 4 screws and connected by 3 connectors to the ribbon cable

assembly. We recommend that the rear connector cover is removed to facilitate disconnection of the

ribbon cable if this module is removed.

The master module is normally factory fitted to the right hand end of the chassis although the design

of the ribbon cable allows modules to be fitted into the chassis in any position. The output module is

the width of 3 input modules and uses 3 of the connectors for its operation.

Ensure that the connectors are fully mated before refitting the rear cover.

The modules have a clearance of approx. 0.25mm. This is deliberate to allow the modules to be

easily removed and refitted to the chassis. Use a strip of thin card (postcard) to set the spacing

between the modules when reassembling. Do not push all the modules tightly together as this will

make them difficult to remove and leave an unsightly space. Remember 0.25mm is only 1/1000".

This is the normal spacing clearance but in an 8 channel chassis, if you push the modules tightly

together the resulting space will be 2.5mm which is 1/10" and looks unsightly.

Formula Sound reserve the right to alter specifications at any time without notice.

All Formula Sound products are designed and manufactured in our own factory which enables us to

maintain strict quality at every stage of manufacture. This attention to detail has helped to win us 14

industry awards to date and has earned us a world wide reputation for the high quality and reliability of

our products.

Formula Sound Ltd.

Ashton Road,

Bredbury,

Stockport,

Cheshire,

England.

SK6 2SR

Tel +44 (0)161 494 5650

Fax +44(0)161 494 5651

Internet http://www.formula-sound.com