Carmelli HAT TRICK NG1015H Manuale di istruzioni per il montaggio - Pagina 5

Sfoglia online o scarica il pdf Manuale di istruzioni per il montaggio per Macchine da gioco arcade Carmelli HAT TRICK NG1015H. Carmelli HAT TRICK NG1015H 8. 4' air hockey table

Stampa la pagina

ASSEMBLY INSTRUCTIONS

1. Attach one LEG PANEL #4 to one RIGHT LEG #2 and one LEFT LEG #3 as shown below with

1/2" SCREW #8. Repeat assembly with remaining LEG PANEL and LEGS. Note: Leg panel graphic

will face out and curved end down when table is upright.

2. Thread one LEG LEVELER #13 to each LEG.

3. Attach assembled LEGS to TABLE BODY #1 with BOLT #6 and FLA T W ASHER #7. Note: The

table is assembled upside down.

4. Carefully turn table over. Attach one GOAL #5 to each end of the table with 5/8" SCREW #15.

Attach Electronic Scorer #14 with 5/8" SCREW #15 and insert leads A & B from Sensor Wires #16.

#16

TIP: It may be easier to

attach legs to table body

in Step 3 if you leave #8

screws a little loose until

legs are attached and

then do nal tightening.

Insert the lead " A "

into the " A " receptacle.

Insert the lead " B "

into the " B " receptacle.