ATI Technologies QC-201 Manuale - Pagina 12

Sfoglia online o scarica il pdf Manuale per Apparecchiature industriali ATI Technologies QC-201. ATI Technologies QC-201 17. Tool changer

Stampa la pagina
Manual, Tool Changer, QC-201
Document #9620-20-B-201 Base Tool Changer-12

4.2 Cleaning, Lubrication, Adjustment and Replacement

4.2.1
Cleaning and Lubrication of the Locking Mechanism and Alignment Pins
(Master Plate).
1.
2.
Cleaning balls and outer surfaces of male
coupling. (QC-210 shown)
3.

Pinnacle Park
1031 Goodworth Drive
The locking mechanism must be in the unlock state before cleaning.
Use a clean rag to thoroughly remove the existing lubricant and debris from
the balls, the male coupling, the cam and the alignment pins.
Check each ball to make sure it moves freely in the male coupling.
Additional cleaning may be necessary to free up any balls that are sticking in
place.
Apex, NC 27539
Tel: 919.772.0115
B - 12
Cleaning balls, cam and inner surface
male coupling. (QC-210 shown)
Fax: 919.772.8259
www.ati-ia.com