Electrolux 253.4475 Manuale d'uso e manutenzione - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso e manutenzione per Congelatore Electrolux 253.4475. Electrolux 253.4475 24. Kenmore elite freezer

Door Removal Instructions

Door Handle Mounting Instructions

1. Remove handle from carton and any other protective

packaging.

2. Position freezer handle end caps over upper and

lower pre-installed shoulder bolts (A) that are

fastened into door, ensuring the holes for the set

screws are facing towards the outside of door if it is

a single unit installation, or towards the refrigerator

door if installing the matching refrigerator.

3. While holding handle firmly against door, fasten

upper and lower Allen set screws (B) with supplied

Allen wrench.

4. Repeat steps 2 and 3 to install refrigerator handle (if

installing the matching refrigerator). Ensure the holes

for the set screws are facing towards the refrigerator

door.

NOTE

All set screws should be tightened and sub-flush of

handle end cap (set screw is seated just below the

surface of handle end cap). The end caps should be

drawn tight to freezer door with no gaps.

Single Unit Installation

Ensure Handle Set Screws

are Facing Each Other

With Doors Closed.

Matching Refrigerator and Freezer Door Handle Installation

Kick Plate Removal

To remove the kick plate, use a Phillips head screwdriver

and remove the two screws holding the kick plate to the

cabinet. Then pull the kick plate away from the unit.

Remove Screws

Kick Plate Removal