Andersen 52ST FS Manuale - Pagina 3
Sfoglia online o scarica il pdf Manuale per Winches Andersen 52ST FS. Andersen 52ST FS 6.
Anche per Andersen 52ST FS: Manuale (9 pagine)
Stampa la pagina
Installing the winch is easy, if you follow these instructions. The numbers in ( ) refer to the position numbers in
the parts list.
What's required for the installation?
Screwdriver (large).
Ø8.5 mm. drill.
Ring spanner to match nuts.
5 x M6x8 (1/4") countersunk head screws and corresponding nuts.
5 x large washers or backing plate ø6.
Bedding compound
1.
Remove screws (1).
2.
Remove self-tailing arm (2) and drum (5).
3.
Mark location of boltholes using the drilling template RD100516 or RD100213.
4.
Remove complete winch. Be sure that no dust comes into contact with the winch while drilling.
5.
Drill the bolt holes Ø8.5mm (11/32").
6.
Apply a light coat of bedding compound, ensuring that each bolthole is bedded.
Keep drain grooves clear.
7.
Fasten lower base (22) and cover (23) into place using 6 pcs. M8 (5/16") countersunk head screws. Use
large washers or a backing plate.
8.
Assemble in reverse order.
9.
Check that the winch is functioning correctly:
The drum should operate smoothly, by turning the drum clockwise by hand.
The drum must not turn when trying to turn the drum anti clockwise.
While turning the winch handle clockwise the drum should turn fast.
While turning the winch handle anti clockwise the drum should turn slowly.