Communications Specialists R-1000 Manuale operativo - Pagina 6
Sfoglia online o scarica il pdf Manuale operativo per Ricevitore Communications Specialists R-1000. Communications Specialists R-1000 12. R-1000 telemetry receiver operating manual
Stampa la paginaACCESSING THE MEMORY BANK
1. To access memory bank, press [MEMO], channel number and [ENT] or
scroll through the channels by using [] or [] or (DIAL).
2. To exit memory press [CLEAR].
SCANNING THE MEMORY BANK
The receiver will pause on each channel for 1 to 30 seconds. The default
setting is 5 seconds. See Menu Programming to change the default setting.
1. Press [SCAN].
2. To exit Scan, press [MEMO] or [CLEAR].
CHANGING DATA IN THE MEMORY BANK
The data stored in the memory bank can be changed or deleted at any time.
1. Press [PROG]. If channel shown is not the one you want to change, press
[] to bring cursor to the channel number. Enter the channel number
you want to change and [ENT] or scroll using (DIAL).
2. Press [] to bring cursor to the frequency, key in new frequency and
[ENT] or rotate (DIAL) to desired frequency.
3. If you are only changing the frequency, press [ENT].
4. Press [] to bring the cursor to TXT to change the comment, press
[ENT] when finished.
5. To delete a channel press [PROG] then []. The cursor is now on the
channel line, enter the channel number and [ENT] or scroll using (DIAL).
Press [CLEAR] and [ENT].
PASS
The pass feature allows you to skip or pass over selected frequency channels
from your memory bank while in the scan mode.
1. You can select the channel to be passed over from the scan or memory
mode by pressing [PASS] while the selected frequency is shown on the
display. The frequency is now omitted from the scan list.
5