Bosch PSR 960 Manuale di istruzioni per l'uso - Pagina 5
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Utensile elettrico Bosch PSR 960. Bosch PSR 960 13. Battery-powered screwdriver
Anche per Bosch PSR 960: Manuale di istruzioni originale (7 pagine), Manuale di istruzioni originale (12 pagine)
![Bosch PSR 960 Manuale di istruzioni per l'uso](/uploads/products/server2/1417576/1417576.jpg)
2 609 140 210 - Buch Seite 3 Montag, 18. November 2002 8:07 08
Changing the Rotational Direction
Operate
the
rotational
switch 3 only at a standstill.
The rotational direction
switch 3 changes the di-
rectional rotation of the
machine. However, this is
not possible if the On/Off
a
b
switch 4 is being pressed.
a
Right Rotation (
)
Turn the rotational direction switch through to the
left stop (normal operation: drilling, driving in
screws, etc).
b
Left Rotation (
)
Press the rotational direction switch to the right
as far as it will go (loosening or unscrewing of
screws and nuts).
Setting the Torque
Carry out a practical test to determine with which
one of the 5 settings of the torque setting ring 1
the screws are driven flush into the material.
Low setting, e. g., small screws, soft
1
materials.
High setting, e. g., large screws, hard
5
materials.
With the correct setting, the clutch disengages as
soon as the screw is driven flush into the material
or the set torque is reached. Select a higher set-
ting when driving out screws, or set to the "Drill-
ing" symbol. The correct setting is to be deter-
mined by practical testing.
Drilling
Set the torque setting ring 1 to the "Drill-
ing" symbol.
Replacing the Chuck
For machines without a drill spindle locking facil-
ity, the chuck must be changed by an authorized
customer service facility for Bosch power tools.
The chuck must be tightened with a
starting torque of approx. 30 – 40 Nm.
5 • 2 609 140 210 • TMS • 13.11.02
Tips
direction
It is advisable to drill a pilot hole first before at-
tempting to screw in large, long screws into
hard materials.
Maintenance and Cleaning
Before any work on the machine itself, re-
move the battery.
For safe and proper working, always keep
the machine and the ventilation slots clean.
Should the machine fail in spite of careful manu-
facturing and testing, its repair should be carried
out by a Bosch power tools authorized service
agent.
For all correspondence and spare parts orders,
always include the 10-digit part number of the
machine!
Environmental Protection
Recycle raw materials instead of disposing
them as waste
The machine, its accessories and packaging ma-
terials should be sorted for environmentally-
friendly recycling.
These instructions are printed on chlorine-free re-
cycled paper.
The plastic components are labeled for catego-
rized recycling.
Defective or worn-out batteries must be recycled
according to the 91/157/EEC guideline.
English - 3
Nickel-cadmium-battery:
If your product is equipped
with a nickel-cadmium-bat-
tery, the battery must be
collected, recycled or dis-
posed of in an environmen-
tally-friendly way.