Community C SERIES CP6 Manuale di installazione - Pagina 7
Sfoglia online o scarica il pdf Manuale di installazione per Altoparlanti Community C SERIES CP6. Community C SERIES CP6 8. Pendant loudspeaker 6.5" full-range
Stampa la paginaPainting the Loudspeaker
These loudspeakers are easy to paint. It's best to paint the baffle and enclosure
before installation.
Type of Paint
The loudspeaker's ABS plastic baffle and enclosure accept almost any type of
latex or oil-based paint. A two-coat application is recommended.
Caution: When applying paint or other coating, ensure that a dedicated Gripple
decor cover is used to cover the Gripple. This will ensure that the movement of
the locking wedges inside the assembly is not impaired. After painting, the
Gripple should not be repositioned on the cable.
Caution: Use only light mineral spirits thinner as a cleaner. NEVER use gasoline,
kerosene, acetone, methyl ethyl ketone (MEK), paint thinner, harsh detergents or
other chemicals as they may permanently damage the loudspeaker. Some of
these chemicals are also toxic and highly flammable.
Painting Process
To obtain the best results follow this procedure:
1. Clean the baffle and enclosure with a light solvent such as mineral
spirits, rubbing with a lightly dampened cloth. Do not use abrasives such as
sandpaper or steel wool.
2. Mask the loudspeaker so that the surround, cone and center area will not
receive any paint. Use a low-tack painter's tape (typically blue in color) to
avoid damaging the loudspeaker surround when the tape is removed. We
advise against using conventional masking tape and NEVER use duct tape in
this application; these kinds of tape generally leave adhesive residue that can
be difficult to remove and that may actually cause damage.
Optional Accessories
Various "Cable Hang Kits" are available. Each includes a zinc galvanized steel
rigging cable with locking end loop and a stainless steel Gripple Speed Clamp.
Included with your pendant loudspeaker are two model PHK-15 kits that have
15-foot (4.6 meter) cables.
Optional accessories include:
• PHK-30: 30-foot (9.1 meter) cable
• PHK-50: 50-foot (15.2 meter) cable
• PSC: Replacement Gripple Speed Clamp
• PST-14: Decorative (split plastic) tubing to dress the hanger cables and electrical
wiring. PST-14 tubing is 14 feet (4.3 meters) long and may be trimmed.
Safety Agency Compliance
4001450
C SERIES - CP6
Conforms to UL1480 Standard
Certified to CSA C22.2 No. 60065 Standard
Cable kits with Gripple
speed clamps meet the following standards:
®
UL 1598 Luminaire Fittings and
UL 2239 Conduit and Cable Support Hardware.
CSA listing for Class 3426-01 (Canada) and
Class 3426-81 (U.S.A.) Luminair Fittings.
DIN 4102-2
Installation Guide
3. After cleaning, apply two or more
two thin coats of either latex or oil-
based paints. Latex paint will adhere
better if an oil-based primer is used
first. Apply the paint with a roller or
brush, or spray it on.
4. The grille should be painted
separately, and when it is not
in place on the loudspeaker. We
further recommend that you remove
the grille's internal cloth mesh, then
spray paint the grille assembly.
Avoid using a roller or brush to paint
the grille as its metal perforated
holes may become clogged with
paint, which degrades sound quality
and also may attenuate the sound.
Reinstall the internal cloth mesh
(or if damaged install a new cloth
mesh).
Page 7