Bosch 300 Series Manuale di avvio rapido e di sicurezza - Pagina 5

Sfoglia online o scarica il pdf Manuale di avvio rapido e di sicurezza per Asciugatrice Bosch 300 Series. Bosch 300 Series 7. Built-in wall ovens
Anche per Bosch 300 Series: Manuale di istruzioni per l'uso (40 pagine), Manuale d'uso (21 pagine), Manuale di installazione (6 pagine), Manuale di installazione (36 pagine), Manuale di installazione (32 pagine), Manuale d'uso e manutenzione / Istruzioni per l'installazione (40 pagine), Manuale di istruzioni per l'uso (50 pagine), Manuale di avvio rapido e di sicurezza (7 pagine), Manuale di installazione (28 pagine), Manuale di avvio rapido (7 pagine), Manuale d'uso e manutenzione (32 pagine), Manuale di servizio (36 pagine), Manuale di avvio rapido e di sicurezza (13 pagine)

Stampa la pagina

Bosch 300 Series Manuale di avvio rapido e di sicurezza

USAGE TIPS FOR BEST RESULTS

Use rinse

aid

for better

drying.

Setting

Factory setting Description

š-Intensive drying

š:‹‹/ off

š:‹‹-š:‹‚

§-Rinse Aid

§:‹†

§:‹‹-§:‹‡

›-Beep at cycle

›:‹ƒ

end

›:‹‹-›:‹„

‚ -Infolight®

‚:‹‚ / on

‚:‹‹-‚:‹‚

˜-Auto power off

˜:‹‹/ unit does

not shut off

˜:‹‹-˜:‹ƒ

automatically

ADJUSTING THE SETTINGS

Press the On/Off button. Hold down button A (see pages 6-7) and press

Start until the display shows š:‹

Release both buttons. The LED for the button A flashes and the digital

display shows the factory set value. Press A to choose the setting.

Press buttons B or C (up or down) to change the setting.

Press Start button to save the setting.

Do not

place

objects in

detergent

tray or

block it with

dishes

Adjust

upper rack

as needed

for large

items.

PUSH

Improved drying for glasses and

plastic, by increasing the tempera-

ture and length.

Dispenses the amount of rinse aid,

which affects drying.

Adjust the sound level of the signal

beep at the end of the cycle. Or turn

off (›:‹‹).

Light projected on the floor to signal

active wash cycle. Set to on or off.

Unit turns itself off after cycle is com-

plete, either after 1 minute, ˜:‹‚ or

after 2 hours, ˜:‹ƒ .

x (x can be any number).

MAINTENANCE TIPS

Scrape

Clean surfaces with damp cloth and mild soap.

off

NOTICE: Do not use abrasives or bleach based cleaners. Do not use stainless

food,

steel cleaner on black stainless or anti-finger print surfaces.

but

Clean the filter 3-12 times a year, depending on usage.

do not

Unscrew the Large Object Trap as illustrated and remove the entire filter

rinse.

system.

Remove the micro-filter from the fine filter, rinse the filters under running

water clean with a soft brush.

Reinstall the filter system in reverse sequence, align arrows.

FREQUENTLY ASKED QUESTIONS

Why is food left on dishes?

It is possible the dishes do not have adequate clearance between them.

Also, be sure nothing is blocking spray arm and that the filter is clean. Select an

intensive cleaning cycle.

Why does the cycle run a long time?

1. Sensors in the dishwasher automatically increase the cycle time to ensure a

good wash when heavy soil is detected.

2. Incoming water may not be hot enough and the dishwasher has to heat it.

Why is E:XX (X can be any number) displayed?

This is an error code. For example, E:22 indicates there is water in the sump

because the filter is blocked or needs cleaning. See the Use and Care Manual

for a list of error codes.

To access the full Use and Care Manual, go to: