Community Commercial Design Series CP6 Manuale di installazione - Pagina 4
Sfoglia online o scarica il pdf Manuale di installazione per Altoparlanti Community Commercial Design Series CP6. Community Commercial Design Series CP6 6. Pendant loudspeaker
Stampa la paginaThese loudspeakers are easy to paint. It's best to
paint the baffle and enclosure before installation.
The loudspeaker's ABS plastic baffle and enclo-
Type of Paint
sure accept almost any type of latex or oil based
paint. We recommend application of two coats.
Caution: When applying paint or other coating,
ensure that a dedicated Gripple decor cover is
used to cover the Gripple. This will ensure that
the movement of the locking wedges
inside the assembly is not impaired.
After painting, the Gripple should not be
repositioned on the cable.
Follow this procedure to obtain the best results:
Painting Process
Model
Sensitivity
(1 watt, 1m)
91 dB SPL
Various "Cable Hang Kits" are available.
Each includes a zinc galvanized steel
rigging cable with locking end loop and
a stainless steel Gripple Speed Clamp.
Included with your pendant loudspeaker
are two model PHK-15 kits that have 15-
foot (4.6 meter) cables. Options include the
model PHK-30 at 30 feet (9.1 meter) and
Conforms to UL1480 Standard
Certified to CSA C22.2 No. 60065 Standard
Cable kits with Gripple speed clamps meet the
following standards:
UL 1598 Luminaire Fittings and
4001450
UL 2239 Conduit and Cable Support Hardware.
CSA listing for Class 3426-01 (Canada) and
Class 3426-81 (U.S.A.) Luminair Fittings.
DIN 4102-2
Commercial Design Series - CP6
Painting the Loudspeaker
1. Clean the baffle and enclosure with a light
solvent such as mineral spirits, rubbing with a
lightly dampened cloth. Do not use abrasives
such as sandpaper or steel wool.
Caution: Use only light mineral spirits
thinner as a cleaner. NEVER use
ethyl ketone (MEK), paint thinner,
gasoline, kerosene, acetone, methyl
harsh detergents or other chemicals as they may
permanently damage the loudspeaker and some
are also toxic and highly flammable.
2. Mask the loudspeaker so that the surround,
cone and center area will not receive any paint.
Use a low-tack painter's tape (typically blue
in color) to avoid damaging the loudspeaker
surround when the tape is removed. We advise
against using conventional masking tape and
NEVER use duct tape in this application; these
Specifications
6.5 inches
Cone Size
CP6
(165 mm)
Freq. Range
(-3 dB)
100 Hz - 12.5 kHz
Optional Accessories
Safety Agency Compliance
Installation Guide
10.0 inches diameter x 13.629 inches tall
Size
(254 mm diameter x 346.2 mm tall)
Tap Switch Settings
8Ω/3.75/7.5/15/30 (70V input)
8Ω/7.5/15/30/NC (100V input)
the model PHK 50 at 50 feet (15.2 meter).
A replacement Gripple Speed Clamp model
PSC is also available. PST-14 decorative
(split plastic) tubing is available to dress
the hanger cables and electrical wiring.
Each PST-14 is 14 feet (4.3 meters) long
and may be trimmed.
Additional Compliance Information
Suitable for use in air handling spaces per
NFPA70 National Electrical Code 2008 Article
300.22(c)(2) and NFPA 90 Installation of Air
Conditioning and Ventilation Systems 2009
Article 4.3.11.2.6.5.
SUITABLE FOR USE IN AIR HANDLING SPACES
kinds of tape generally leave adhesive residue
that can be difficult to remove and that may actu-
ally cause damage.
3. After cleaning, apply two or more two thin
coats of either latex or oil-based paints. Latex
paint will adhere better if an oil-based primer is
used first. Apply the paint with a roller or brush,
or spray it on.
4. The grille should be painted separately, and
when it is not in place on the loudspeaker. We
further recommend that you remove the grille's
internal cloth mesh, then spray paint the grille as-
sembly. Avoid using a roller or brush to paint the
grille as its metal perforated holes may become
clogged with paint, which degrades sound quality
and also may attenuate the sound. Reinstall the
internal cloth mesh (or if damaged install a new
cloth mesh).
8.1 lbs
Weight
(3.7 kg)
Power
Rating
60 Watts
Page 4