Bosch Nexxt Series Manuale di istruzioni per l'uso, la cura e l'installazione - Pagina 11
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso, la cura e l'installazione per Asciugatrice Bosch Nexxt Series. Bosch Nexxt Series 27.
Anche per Bosch Nexxt Series: Manuale di istruzioni per l'uso, la cura e l'installazione (26 pagine)
Stampa la pagina
Water drainage
d
CAUTION
Do not bend or pull the water
drainage hose.
Height difference between the
installation location of the washing
machine and the drainage point:
Maximum 8 feet / 244 cm.
Connecting the water
drainage hose
q
Attach the drain hose to the
end of the drain connection.
q
Secure the connection point
with the clamp.
Use a screwdriver!
Standpipe Installation
q
Use the elbow. Attach the
elbow to the end of the hose
and insert end of hose into
standpipe.
q
Use a strap or cable tie to hold
hose in place.
In-Wall Installation
d
q
Use the elbow. Attach the
elbow to the end of the hose
and insert end of hose into wall
drain.
q
Use a strap or cable tie to hold
hose in place.
Drainage into a siphon
q
Secure the connection point
with a hose clip(not included in
factory-supplied equipment).
Drainage into a sink
d
CAUTION
Ensure that the plug is not in the
drain hole.
q
Attach water drain hose
securely to sink.
q
When the water is being
drained, check that the water
flow out of the sink is adequate.
Transport, such as
when moving out
Before transporting the washing
machine:
-
Turn off the water.
-
Disconnect the washing
machine from the main outlet.
-
Dismantle the supply and
drainage hoses.
-
Install the transport bolts.
Having transported the
i
appliance and ensured proper
installation and connection,
allow the Drain program to run
through before starting the first
wash program.
Preparing and inserting the
transport bolts
q
Remove the covers.
q
Prepare the transport bolts:
Loosen the screw in the sleeve
until the end of the screw is
level with the end of the sleeve.
d
q
Insert and tighten all transport
bolts. The lug on the washing
machine must be located in the
groove in the rear panel of the
housing.
11