Anderson 70G600 Manuale operativo - Pagina 8
Sfoglia online o scarica il pdf Manuale operativo per Bruciatore Anderson 70G600. Anderson 70G600 16.
Stampa la paginaANX70 Series burner installation dimension shown as table 2
Type
70G300
70G600
70G900
10. Burner Installation
10.1 Storage:
– Make sure that the area is clean.
– Store the components in a cool, clean, dry room.
– Keep the components in the original package as long as possible
10.2 Handing
– Make sure that the components are clean and free of damage.
– Protect the components from weather, damage, dirt and moisture.
– Protect the components from excessive temperatures and humidity.
– Use appropriate support equipment, i.e. harnesses, straps, chains etc. when lifting
burner components.
10.3 Pre-Installation Checklist
Air quality requirement:
– If there are corrosive fumes or materials in the surrounding air, find clean air source
to supply to the burner. Observe ambient temperature limits as stated in operation
data.
– If combustion air from outside of the burner room, must provide an opening in the
room wall of at least 6 cm
– Do not allow exhaust gases to accumulate in the work area. Provide a means for
exhausting these gases from the building by blower.
– Install the burner with enough room so it may be easily accessed for inspection.
10.4 Operation Requirement
Be sure the burner operating environment matches the original operating
specifications. Check the following items
– Voltage, frequency, and stability of electrical power
– Fuel type and fuel supply pressure
– Adequate fresh, clean, combustion air
Anderson Thermal Soluions（Suzhou）Co. Ltd.
Anderson Thermal Solutions – ANX70 Burner Operation Manual
Table 2 ANX70 Series burner installation dimension (mm)
A
B
285.5
285.5
285.5
285.5
285.5
285.5
per 1 kW to supply the burner fresh combustion air.
2
C
D
E
290
308.5
260
290
308.5
260
320
360
264
6
F
G
670
330
670
330
754
320