Anderson FFAH21 Manuale operativo - Pagina 6

Sfoglia online o scarica il pdf Manuale operativo per Bruciatore Anderson FFAH21. Anderson FFAH21 8.
Anche per Anderson FFAH21: Manuale operativo (10 pagine)

Stampa la pagina

Note:

the bracket used for side port and under port is difference

Side port burner bracket

Fix the bracket to the steel structure. Install the seal plate to the burner block

and tighten it with the retaining bolts. The positioning tube (to be purchased

separately) is used to position the bracket so that the installation position of the

bracket can ensure that the burner is concentric with the sealing plate and can

be fitted with the sealing plate without gap. The bracket is fixed so that it cannot

be easily moved.

The sealing plate shall provide external cooling air. It is recommended to use a 2"

air duct with the nozzle inclined to the sealing plate to allow cooling air to blow

through the entire sealing plate.

– Gas and cooling air must be equipped with check

valve, otherwise fire may occur.

– Lack of cooling air to Seal Plate may shorten the

service life.

2. Install Burner

On the non-fire side, place the burner on the burner bracket, push forward the

burner, make the burner tip seal tight to the seal plate, and secure the burner

body with the bracket lock ring. Ensure burner do not move due to external

forces. Connect the burner cooling air hose to the cooling air inlet. Connect

burner gas hose to gas inlet. Before firing, assemble cooling air ball valve and

test pressure at 0.3-0.5 bar. Otherwise, adjust the burner downcomer cooling air

limit orifice valve or globe valve, set the pressure to meet the requirements.

3. Burner startup/stop

Startup

Place the burner on the burner bracket and clamp it, making sure that the end

face of the outer nozzle of the burner tight touch the sealing plate. Connect the

Anderson Thermal Soluions（Suzhou）Co., Ltd

Anderson Thermal Solutions – FFA12 Burner Operation Manual

Attention!

Under port burner bracket