Carnival King 382GCM16N Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Elettrodomestici da cucina Carnival King 382GCM16N. Carnival King 382GCM16N 7. Gas crepe maker

General Installation

•

T h ese appliances are intended for use with Natural Gas or LPG

Regulators used with this appliance must comply with the local standards

Appliances may be converted by qualified personnel. A conversion kit is supplied for

the orifice spud.

•

GAS CONVERSION - Conversion from Propane to Natural Gas or vice versa may only be performed

by the factory or its authorized service agent in the case of troubleshooting, ensure that the correct

orifice sizes of the spuds have been provided.

GAS CONNECTION - The Crepe Maker comes fitted with a 3/4" N.P.T. male adapter for connection to

•

pressure regulator.

GAS PIPING - Gas piping shall be of such a size and so installed as to provide a supply of gas sufficient

•

to meet the full gas input of the appliance. If the appliance is to be connected to existing piping, it shall

be checked to determine if it has adequate capacity. Joint compound (pipe dope) shall be used sparingly

and only on the male threads of the pipe joints. Such compounds must be resistant to the action of

LP gases.

•

MANUAL SHUT OFF VALVES - A manual shut off valve should be installed upstream from the manifold

and within 4 ft of the unit in a position where it can be reached in the event of an emergency.

This appliance should only be used in a WELL VENTILATED ROOM, adequate ventilation allows for the

•

removal of the products of combustion and allows the entry of replacement air.

•

This appliance has a factory set primary air intake and no adjustment is necessary. No adjustments

should be undertaken unless carried out by a factory approved agent.

•

This appliance has a low shelf which can be used as the warming tray.

www.CarnivalKingSupplies.com

gAS CREPE MAKER

NATURAL GAS

ORIFICE

#44 (2.1mm)

LP GAS

#55 (1.3mm)