Community dSPEC Manuale di risoluzione dei problemi di Connect - Pagina 14
Sfoglia online o scarica il pdf Manuale di risoluzione dei problemi di Connect per Apparecchiature di registrazione Community dSPEC. Community dSPEC 20.
Verify dSPEC IP Address Configuration
To re-enable an automatic IP addresses IP on dSPEC go to the
Network Settings
on the dSPEC.
Ensure
Obtain an IP address automatically
9. Reset the appropriate Windows Network Connection
On Windows Vista or Windows 7/8 click the Start button
Start, click Run, type ncpa.cpl then <Enter>. Right click on the connection that will most likely be used to connect to
dSPEC and choose Disable.
Administer | Firmware screen
is selected and click Ok.
, type ncpa.cpl then <Enter>; on Windows XP click
P a g e
| 14
and click
Change