ANDERSON-NEGELE NSL-F series Manuale operativo - Pagina 5

Sfoglia online o scarica il pdf Manuale operativo per Accessories ANDERSON-NEGELE NSL-F series. ANDERSON-NEGELE NSL-F series 20. Continuous level sensor. sensors for food and biopharma.
Anche per ANDERSON-NEGELE NSL-F series: Manuale operativo (20 pagine)

Stampa la pagina

4...20-mA signal



Filling level height for 4/20-mA signal



"Dry run" warning signal



"Failure" error signal



"Underdriven/overdriven" signal limit



"Underflow/overflow" error signal



Signal simulation (3.95...20.05 mA)

A list of the parameters settings in the continuous level sensor is included with the delivery. These de-

fault parameter values, and the parameter values changed by the user, can be printed out using the MPI-

200 programming adapter software.

When making the settings, note the help texts in the MPI software. These contain additional u seful

information on changing the selected parameter.

6.1 Setup using the MPI-200 programming adapter

The MPI-200 programming adapter is connected to the NSL-F continuous level sensor via the external

MPI-200-F adapter piece. It must be ensured that the NSL-F continuous level sensor is permanently con-

nected to the supply voltage while the parameters are being set.

Connection of the programming adapter MPI-200

1: Connection for M12 connector

(external power supply)

2: USB port for connecting

to a PC incl. power

supply if not supplied externally

3: Connecting cable to

adapter for NSL-F

Signal flow during programming

Filling level measurement



Filling level zero point/offset



Filling level slope/gain



Damping/filter



Physical unit

Mounting position

Connection plug for MPI-200-F adapter as an

intermediate plug between the NSL-F electron-

ics and the MPI-200 connection 3 (see next

figure).